Maintenance Service Tag Ring

Maintenance Service Tag Ring

The maintenance service tag ring is the 25mm aluminium ring that fixes a service tag to the equipment. Aluminium holds its shape through repeated opening. A technician can swap a tag at each service without the ring fatiguing and dropping the record.Small part, large consequence. Nobody can read a tag lying on the ground. An extinguisher with no attached record reads as unserviced, whether or not the work happened.

Fits the AS 1851 record chain

Routine service of fire protection equipment in Australia follows AS 1851:2012. The tag carries the record. The ring keeps the tag on the asset. Order rings with tags for a full service run rather than discovering a shortfall halfway around a building.

• Aluminium ring, 25mm
• Fits standard service tags
• Suits extinguishers, hose reels and fire blanket positions
• Priced per unit for bulk service runs

Order the set together

Most service runs need three items: the ring, the tag and a punch to mark the month. We stock the maintenance service tag and the maintenance tag punch alongside this ring. We also stamp tags in house if you would rather not hold the tooling.Our article on the fire testing intervals NSW enforces sets out which assets need tagging and how often. Product images are indicative and the ring supplied may differ in finish.

Specifications

• Material: aluminium
• Diameter: 25mm
• Compatibility: standard fire equipment service tags
• Application: extinguishers, hose reels, fire blanket positions
• Related standard: AS 1851:2012 routine service records
• Supplied: singly