Frequently Asked Questions
Using the Touchscreen Control Unit (TCU), you can activate or deactivate components, name or rename components, manage users, respond to nurse call and evacuation events, view connectivity and power of components in real time, run reports for auditing. The TCU works in conjunction with our smartphone app and SMS notifications.
In the event of a medical emergency, the worker, patient, or another individual can trigger an alert to summon a response from onsite safety personnel and emergency services. The Orisent nurse call units offer two-way notifications, reassuring the patient or injured worker by confirming that the alert has been received and is being addressed.
Yes – our hardware is covered by a 12-month warranty. Extended warranties can be purchased should the hardware be required on site for more than 12 months, or if it’s going to be reused on another project. To learn more about our product warranties speak to our sales or customer success team.
The price of an emergency alert system that suits your site or workplace requirements depends greatly on the configuration of where it needs to be installed, and what services you need it to perform. The software subscription is a flat annual rate and is charged per site.
Orders tend to be dispatched within one week of receiving a purchase order (PO). However, we can turn around faster if required. We try to assist where we can!
For questions regarding a system you already have on site or at your workplace, please get in touch with us by either calling or emailing using the details in the header above.
We have many customers who reuse a system on a new site. For these projects we offer a recommissioning service which will ensure all devices are using the latest software, and are networking correctly.
Yes! The units can be programmed to work together without a panel. However you will have to review each unit for battery and signal strengths.
If you include a control panel, this monitors battery levels and signal strength every 6 hours.
Yes, its simple. All you do is hold the button down for approx. 5 seconds until the siren stops.
Programming is already completed to suit each site before the system is dispatched. Once it arrives, all you have to do is screw it to where you require. Or if you ordered the Safety Stations with the system, the units will be mounted on arrival!
Any qualified electrician can install this device. It is dispatched from Checkpoint with installation instructions and can be installed within minutes!
Using the Touchscreen Control Unit (TCU), you can activate or deactivate components, name or rename components, manage users, respond to nurse call and evacuation events, view connectivity and power of components in real time, run reports for auditing. The TCU works in conjunction with our smartphone app and SMS notifications.
In the event of a medical emergency, the worker, patient, or another individual can trigger an alert to summon a response from onsite safety personnel and emergency services. The Orisent nurse call units offer two-way notifications, reassuring the patient or injured worker by confirming that the alert has been received and is being addressed.
Yes, our hardware is covered by a 12-month warranty. Extended warranties can be purchased should the hardware be required on site for more than 12 months, or if it’s going to be reused on another project. To learn more about our product warranties speak to our sales or customer success team.
The price of an emergency alert system that suits your site or workplace requirements depends greatly on the configuration of where it needs to be installed, and what services you need it to perform. The software subscription is a flat annual rate and is charged per site.
Orders tend to be dispatched within one week of receiving a purchase order (PO). However, we can turn around faster if required. We try to assist where we can!
For questions regarding a system you already have on site or at your workplace, please get in touch with us by either calling or emailing using the details in the header above.
We have many customers who reuse a system on a new site. For these projects we offer a recommissioning service which will ensure all devices are using the latest software, and are networking correctly.
Yes! The units can be programmed to work together without a panel. However you will have to review each unit for battery and signal strengths.
If you include a control panel, this monitors battery levels and signal strength every 6 hours.
Yes, its simple. All you do is hold the button down for approx. 5 seconds until the siren stops.
Programming is already completed to suit each site before the system is dispatched. Once it arrives, all you have to do is screw it to where you require. Or if you ordered the Safety Stations with the system, the units will be mounted on arrival!
Construction & Civil Engineering
Shipbuilding & Marine
Mining & Energy
Rail & Transport Infrastructure
Events & Temporary Structures
Any qualified electrician can install this device. It is dispatched from Checkpoint with installation instructions and can be installed within minutes!