4ft Emergency Light Batten – Wire Guard

4ft LED Emergency Light Batten with Wire Guard

The 4ft emergency light batten with wire guard is a maintained LED luminaire for ceiling or wall mounting. The steel guard covers the diffuser and protects the tubes from tools, trolleys and stored stock.Two 18W LED tubes run from a constant current driver, giving more coverage per fitting than the 2ft version on the same wattage class. Rated LED life is 50,000 hours. A lithium battery holds the fitting in emergency mode for 3 hours after mains failure.Design and manufacture follow AS/NZS 2293.3. Snap latches open the body and both end caps, so a contractor reaches the tubes, driver and battery without removing a screw.The IP20 rating restricts this fitting to dry indoor positions. Do not install it outdoors, in wash down areas or in dusty process environments.The fitting measures approximately 1255mm long, 125mm wide and 96mm high. Warranty runs 3 years. Choose this length over the 2ft emergency light batten for longer runs where fewer fittings and joins simplify the install.

Specifications

• Wide body LED batten with wire guard cover
• 4ft long
• 2 x 18W LED tubes
• Constant current driver
• Lithium battery
• 3 hour runtime in emergency mode
• Maintained operation
• IP20 rating
• Ceiling and wall mount
• Snap latch body and end caps, no screws to open
• 50,000 hour rated LED life
• Approx. size L1255mm x W125mm x H96mm
• Designed and manufactured to AS/NZS 2293.3
• 3 year warranty