2ft Emergency Light Batten

2ft LED Emergency Light Batten

Fit a 2ft emergency light batten in ceiling voids, plant rooms and other spaces where a wire guard adds cost without adding protection. This is the standard body without the steel guard fitted to the wire guard variant.

Specifications:

• Wide body LED batten, 2ft long
• 2 x 10W LED tubes on a constant current driver
• Snap latch body and end caps, no screws to open
• Approx. size L650mm x W125mm x H96mm
• IP20 rating, dry indoor positions only
• Lithium battery, 3 hour runtime in emergency mode
• 50,000 hour rated LED life
• Maintained operation
• Designed and manufactured to AS/NZS 2293.3
• 3 year warranty

Choose the wire guard version wherever tools, trolleys or stored stock could strike the fitting directly. This standard body suits positions clear of that contact, such as a corridor ceiling line or a service riser.AS/NZS 2293.2 covers the routine service and maintenance regime that applies once you install the fitting. That regime covers periodic testing, confirming the battery and LED still perform when mains power fails. Budget for that testing cycle across your full fitting count, not just the fittings visible from floor level.